Manometer - Capsule - robust version 

• Manometer Type Series KP 10D 5.1 – EN 837-3

  – Capsule – robust version –

  • Version for gas acc. to DVGW G 491
  • Certificate DIN EN 10204/2.2

  Technical Characteristics

  Class:	1,6
  Standard sizes:	NG 100 mm and 160 mm
  Connection:	G ½“ B below, SW 22
  Display range:	0-10 to 0-600 mbar
  Measurement system:	copper alloy
  Overload protection:	up to 10-times overload-proof
  Housing:	stainless steel, blank (1.4301)
  Viewing glass:	instrument flat glass
  Bayonet ring:	stainless steel, blank (1.4301)
  Temperature range:	-20 °C to +60 °C
  Temperature behaviour:	0.3% per 10°C deviation
  Protection class:	IP 54 (EN 60 529/IEC 529)
  Zero correction:	front side

  Dimensions

  NG	Dimensions (mm)								Mass
  	a	b	D1	D2	e	G	h+-1	SW	(kg)
  100	15,5	49,5	101	99	17,5	G 1/2” B	87	22	0,60
  160	15,5	49,5	161	159	17,5	G 1/2” B	118	22	1,10
  Pressure connections acc. to EN 837-1 / 7.3

  Prices

  Bitte kontaktieren Sie uns unter info@tecon-systemtechnik.de oder +4926196389744. Danke!

  Anzeigebereich	Item No.	Price
  mbar	NG 100	€
  0 – 10	MA10K1051076	75,50
  0 – 16	MA10K1051086	75,50
  0 – 25	MA10K1051096	75,50
  0 – 40	MA10K1051106	75,50
  0 – 60	MA10K1051116	75,50
  0 – 100	MA10K1051126	75,50
  0 – 160	MA10K1051136	75,50
  0 – 250	MA10K1051146	75,50
  0 – 400	MA10K1051156	75,50
  0 – 600	MA10K1051166	75,50
  Certificate DIN EN 10204 / 2.2	APZM4	18,00

  Display range	Item No.	Price
  mbar	NG 160	€
  0 – 10	MA16K1051076	159,50
  0 – 16	MA16K1051086	159,50
  0 – 25	MA16K1051096	159,50
  0 – 40	MA16K1051106	159,50
  0 – 60	MA16K1051116	159,50
  0 – 100	MA16K1051126	159,50
  0 – 160	MA16K1051136	159,50
  0 – 250	MA16K1051146	159,50
  0 – 400	MA16K1051156	159,50
  0 – 600	MA16K1051166	159,50
  Certificate DIN EN 10204 / 2.2	APZM4	18,00

  Special version possible

  Connection:	1/2” ; 3/8” NPT/BSP M 20 x 1,5 eccentric rear side
  Throttle screws:	0,3 mm; 0,6 mm; 0,8 mm
  Special scales:	PSI/bar; etc.
  Double scales:	bar/Pa, Pa/PSI etc.

  DVGW worksheet G491

  Deployed pressure gauges have to be designed and constructed in their individual compressive strength range in relation to their resistance to cope with the highest possible operating pressure. At locations in which 2.5-times scale end value can be exceeded, e.g. between gas pressure regulating unit and incoming pressure-resistant shut-off valve or in the bypass line, pressure-resistant units have to be deployed or special measures be taken against overloading, e.g. through an excess pressure protection device (see datasheet MPV) or through the use of
  a pressure gauge with higher scale end values.

  
  Request your offer or more information now Download as PDF